Bestseller
Firetwister - the pool heater with fire
Why you need a Firetwister pool heater?
The problem is well known, especially in Europe. In midsummer, the pool at home has the optimal temperature for 2-3 weeks, but the remaining months with nice weather are often too cold for swimming. When looking for solutions, one quickly arrives at solar heating, heat pumps, electric heating and many more. However, most products quickly offer no added value or lead to overpriced electricity bills.
The Firetwister is for customers who want to heat up their 2,000 to 23,000 liter pool by 5-10 degrees in summer, depending on the outside temperature and the amount of water. In order to be fast, inexpensive and independent of wind and weather. Unfortunately, customers whose pool is larger than 23,000 liters must be told that it makes no sense from a cost/benefit factor to heat their pool in this way.
The Firetwister is a coaxial heat exchanger that fits into your existing pool system with 32/38 mm pool hoses
can be installed. The water flows through the heating coil made of durable stainless steel and absorbs the thermal energy from the fire. The connections, like the hose, are flowed through with the cold pool water and cooled, so you don't have to worry about damage as long as no flames come directly to the connections.
The diameter of 12 mm creates a back pressure, which increases the amount of water that flows back to the pool.
significantly reduced. We therefore recommend installing a bypass so that you can use the full pump capacity in filter operation.
When heating with the Firetwister, two important things are required:
1. Wood: Depending on the size of the pool, a wheelbarrow of wood can increase the temperature by 1 °C. Therefore you should be aware that it has to be a little more wood than the usual amount of grilling.
2nd time: No matter how excited you are about going swimming, depending on the size of the pool, it can take several hours (5-10 hours) for a few degrees Celsius more. Depending on the outside temperature, this temperature lasts for hours or even days (in an insulated pool).
If you are unsure about your pool project, please ask us with information on the water volume, pool pump and desired temperature. Then we can help you with words and deeds.
Firetwister® BASIC Pool Heater
At the end of April at the beginning of May, the weather is rather modest and you would like to jump into the pool, the dog only jumps in at 10 ° C water temperature. With the Firetwister this is an end, because thanks to its easy handling and high efficiency, the bathing season begins for you. The Firetwister can be integrated into your existing pool system in just a few minutes thanks to the combination connection. Whether 32 mm or 38 mm pool hoses, assembly is child's play and bombproof with the stainless steel hose clamps. The Firetwister consists of 12 meters long and 1 mm thick high-quality stainless steel tube with a diameter of 12 mm. It is almost indestructible and, unlike copper, can be kept for many years, even if it is stored outside.
The Firetwister is simply connected to your pool hoses after your pool filter. You can put the Firetwister directly into the fire or build your own personal pool stove with a fire barrel. The water is heated by the fire and, depending on the pool size and type of heating, by up to 7 ° C -10 ° C per 1000 liters. Solar mats only achieve their full performance in strong sunlight, with a heat pump you can burn your wallet in a short time due to the far too high electricity costs. Be independent of the season and weather. Open the bathing season as it suits you and enjoy bathing fun at pleasant water temperatures.
An overview of your benefits
- 100% stainless steel
- Made in Germany
- heats 1000 liters up to 7 °C per hour
- heat-resistant up to 1500 °C
- heat with wood, briquettes or charcoal
- easy to clean
- independent of sun and electricity
- free support even after the purchase
- easy connection for 32 mm and 38 mm pool hose
- including fastening material (2x hose clamps)
- resistant to chlorine and salt water
- longer durability compared to steel or copper
Firetwister® PRO Pool Heater
The Firetwister Pro is not just a barrel of fire, but a high-quality pool stove that is 100% hand-made. The Firetwister Pro can be integrated into your existing pool system in just a few minutes thanks to the combination connection. Whether 32 mm or 38 mm pool hoses, assembly is child's play and, with the stainless steel hose clamps, bombproof. Simply remove the combination connector and screw your 1/2 inch Gardena hose connector onto it if you want to use a garden hose. It is almost indestructible and, unlike copper, can be kept for many years, even if it is stored outside. The Firetwister Pro is simply connected to your pool hoses after your pool filter.
The water is heated by the fire, depending on the pool size and type of heating, by up to 7 °C -10 °C per 1000 liters. Solar mats only perform at their full capacity when there is strong sunlight, with a heat pump your electricity bill is more likely to increase before the pool warms up. Be independent of the season and weather. Open the bathing season as it suits you and enjoy bathing fun at pleasant water temperatures.
An overview of your benefits
- 100% stainless steel
- Made in Germany
- operating instructions included
- heats 1000 liters up to 12 °C per hour
- diameter approx 30 cm
- combustion chamber height (without feet) 40 cm
- total height 48 cm
- suitable for 32 mm & 38 mm pool hose
- direct connection to hot tubs possible
- heat with wood, briquets or charcoal
- easy to clean
- regardless of sun and electricity
- free support even after purchase